Approximately 3 metres in length used to determine lateral surface regularity of a road or floor surface etc. Lightweight straight edge equally supported at each end with an aluminium wedge (supplied separately) which gives a set height between the surface and the beam.
Using the straight edge with raising blocks you can measure any vertical irregularity using an optional 2.5mm incremented wedge with a range of 12.5mm low to 12.5mm high. Can also be used on floor slabs and other areas where regularity of finish is important. Size 25 x 76 x 3000mm weight 3.54kg. 3m lightweight aluminium straight edge with carrying loops. Optional metric graduated measuring wedges marked every 2.5mm available. Measuring range 12.5mm low to 12.5mm high.
Please allow up to 72hrs for delivery of this product.
Our code: C0901130
